Hi m8

Yes ..no any other setup. Just config your router to open the corect ports...


colossus
<!--QuoteEnd--></div><!--QuoteEEnd-->


thank you for answer

Colossus, thanks a lot for everything!!!
I have a few specific questions to ask you prior to buliding my own winxp server for cardsharing.

First of all, i am currently using cardsharing through DreamBox (7000s DreamBox server with evocamd/newcs) with 2 cards. Clients (lan and wan) are running evocamd.

I would like to kindly ask you:
1) what are the minimum specs for this windows based server?
2) can it run xin xp home?
3) are there any card readers that accept two cards? (irdeto2 is what i must have). Please recommend a couple. Should they be serial ones, or is usb ok?
4)Will evocamd still work?

Thanks a lot for your time and for sharing the knowhow!

Hi leshim

Your answers

1. Any pc running winxp its ok for cardserver. Even celeron with 256mb ram.
Just get a good power supply. (it will be open all the time 24/7)
2. Yes you can run it on xp home.
3. Any satellite cardreader (phoenix) serial or usb its ok.
4. Yes Evocam its ok.

colossus

i have the same problem, what did you do to fix it, i also use canal digital nordic card.
and how can you use two cards in this program

Hi all

this is my post #1 on this board... so first of all: thank you for all these really interesting threads... and thank you in advance for your help

I have a win2k PC, running newcs. It manges a NDX càrd (s*ky I) via a smartmouse on com1. On the same PC, two sessions of dsr9500 are used to interface a couple of STBs (Phìlìps goldboxes), which are connected on com2 and com3.
All runs fine... but obviously, this configuration can only manage NDX ecms.
Actually, when I need something different, I have to change the setting of the STB to switch from cs to on board emù... and viceversa, when I'm back on s*ky. That's not so easy, for my child (and my wife ;))
It would be nice to have my server working on other CA systems too... but:
- I have no more free serial ports, nor USB ports (yes... that PC is very, very old :D)
- the only interesting channels -to me- are coded in via 2.3 (sr*g)...
- even if I add a serial port and a smartmouse... I will need a wafer/fun càrd; and updating it is not so funny (...you have to take it, put it in the Apollo programmer...:( )


To be honest...I found a *nice* program (WSP, Windows Sharìng Pàck), which should be my solution... but its emu fails decoding sr*g's ecm. It doesn't force byte 3 and 7, in delivered DWs, to be chacksums (sum mod 0x100 of three previous bytes).
I have also tried to use WSP as a "bridge" to a camd3 server (...running on the same PC :D)... but it seems that WSP doesn't engage camd3 correctly. In TCP mode the login procedure fails; in UDP mode I only see a message on camd3 console... something like "ddmmyy hhmm camd3: UDP 00 -> xxxx:yyyyyyy:wwww 0.050000s from 127.0.0.1 (user)"... but I don't know the meaning of those fields (x, y, w, z)... also, I don't know "what" are those 50mS for. Anyway: the workaround doesn't work, the STB can't get del DWs.
If someone can explain me why (in other words, how does camd3 work)... it woul be very appreciated :))

..But here's my "main" question: is there any "newcamd protocol-based emusèrver", running on Windows?

Again: thank you in advance for you cooperation

REgards

Hi there , thanks for the very good HowTO.

I am new to satellites, <a href="http://nl.wikipedia.org/wiki/DreamBox" target="_blank">DreamBox</a> and Cardsharing, im good with PCs though.
I have one satellite reciever at home, and one at office. I have permanent broadband connection at both places, with diferen ISP.
I would like to setup cardsharing and buy <a href="http://nl.wikipedia.org/wiki/DreamBox" target="_blank">DreamBox</a> for both sites (home and office) . But i have a concern, i heard that cardsharing will not work with NAT-ed ip adresses??!!!!
I have public ip adress at home , but i have private (NAT-ed) ip adress at my office.
Will the cardsharing work in my situation?

As long as your office DreamBox is the client it works, otherwise it's not possible.
Make sure you open a port on your router (server).
But you must know that cardsharing trough the internet is forrbidden by law....

Kind regards,
FreeSat

Sorry... I can't really believe that I'm the only WSP user... and that nobody knows how does camd3 protocol work...
So...any answers to my questions...?

Regards

Hi m8

Yes it seem that you are the only one to use WSP...in this forum...

And i dont follow your config "dsr9500 are used to interface a couple of STBs (Phìlìps goldboxes),"

Sorry but i dont know what those things are.

A lot of people i know have a NDS (sly it) card working fine on a pc with newcs as cardserver.



By theway. This post is on "How To Setup A Windows Pc As A Cardserver With Newcs"


If you need any help on how to setup your Newcs...

yes we can help you




colossus