I try since a week to share in my lan my official card but it doesn't work.

My hardware :

-1 PC with phoenix card reader on com1.
- 1 TT S2-3200
- DvbDream.

I have tested the hardware with poorman's cam with success.

I replace poormans plugin by Card Server Client V4.002
I configure NewCS 1.17 RC10 server
My newcs.xml file :

I start dvbdream, i activate the plugin, and nothing happen
Here are some informations given by the monitor option in the client plugin :

<!--quoteo--><div class='quotetop'>QUOTE</div><div class='quotemain'><!--quotec-->15:13:25.531 - servers[0] started: newcamd525:127.0.0.1:10001
15:13:26.500 - newcamd525:127.0.0.1:10001: connecting...
15:13:26.515 - newcamd525:127.0.0.1:10001: connection done.
15:13:26.562 - newcamd525:127.0.0.1:10001: random bytes received...
15:13:26.578 - newcamd525:127.0.0.1:10001: send DATA_REQ...
15:13:26.609 - newcamd525:127.0.0.1:10001: Authorization done.
15:13:26.625 - newcamd525:127.0.0.1:10001: Cards present:
15:13:28.312 - CAT received:
15:13:28.312 - 0000: 01 B0 15 FF FF C5 00 00 09 04 09 19 E1 2D 09 04 .............-..
15:13:28.312 - 0010: 09 3B E1 2D C3 00 C5 .;.-...
15:13:28.312 - Can't find: CAID 0500, IDENT 008110
15:13:29.406 - newcamd525:127.0.0.1:10001: send_ecm( CAID 0500, IDENT 008110 )
15:13:35.765 - CAT received:
15:13:35.765 - 0000: 01 B0 3C FF FF CB 00 00 09 15 01 00 E0 C1 04 E0 ..<.............
15:13:35.765 - 0010: C4 00 81 E0 C5 00 80 E0 C7 00 88 E0 C8 00 86 09 ................
15:13:35.765 - 0020: 0C 05 00 E3 02 13 01 20 14 03 00 81 10 09 0C 05 ....... ........
15:13:35.765 - 0030: 00 E3 00 13 01 20 14 03 02 36 00 35 85 ED ..... ...6.5..
15:13:35.765 - SECA EMM: CAID 0100, EMMPID 00c4, IDENT 000081
15:13:35.765 - SECA EMM: CAID 0100, EMMPID 00c5, IDENT 000080
15:13:35.765 - SECA EMM: CAID 0100, EMMPID 00c7, IDENT 000088
15:13:35.765 - SECA EMM: CAID 0100, EMMPID 00c8, IDENT 000086
15:13:35.765 - Viaccess EMM: CAID 0500, EMMPID 0302, IDENT 008110
15:13:35.765 - Viaccess EMM: CAID 0500, EMMPID 0300, IDENT 023600
15:13:35.781 - EMM Started on: CAID 0500, EMMPID 0302, IDENT 008110
15:13:38.421 - newcamd525:127.0.0.1:10001: send_ecm( CAID 0500, IDENT 008110 )
15:13:49.187 - newcamd525:127.0.0.1:10001: send_ecm( CAID 0500, IDENT 008110 )
15:13:58.859 - newcamd525:127.0.0.1:10001: send_ecm( CAID 0500, IDENT 008110 )<!--QuoteEnd--></div><!--QuoteEEnd-->

I have One error (in bold).
The last lines repeat all the time

I dont know what i could do now.

If you have an idea ...

Thanks a lot

Hi everybody,

I'm trying tot get my windows newcs server running. I seached and tried a lot. But even with all the information i found it's not working :s

I have a win Xp system with a Smargo smartreader+. This USB device is installed properly. It gets com port 6 assigned.

So in the newcs.xml I use that port. As told earlier in this topic I set my server IP at the <udp_host> tag and entered the servername and user/passw combinations I want.

Here's my .xml:

<?xml version="1.0"?>
&#60;!--

For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)

--&#62;



<newCSconfig>

<readers name="Card Readers">
<device>
<name>phoenix</name>
<type>Phoenix</type>
<node>COM6</node>
<mhz>357</mhz> &#60;!-- or 600 --&#62;
<parity>none</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>yes</PTShandshake>
<crypto-special>yes</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>10001</newcamd_port>
<priority>round</priority> &#60;!-- hard is default --&#62;
<sid>
<allow>
&#60;!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. --&#62;
<id></id>
</allow>
<deny>
&#60;!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. --&#62;
<id></id>
</deny>
</sid>
</device>


</readers>

<radegastserver>
&#60;!-- valid value for enable are:
0,1 - Enable or Disable radegast server. --&#62;
<enabled>no</enabled>

&#60;!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. --&#62;
<port>10002</port>

&#60;!-- valid value for allow are:
ALL - Not active yet. --&#62;
<allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
<cache>
<emm>100</emm>
<ecm>100</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile>logfile.txt</logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.67</udp_host>
<udp_port>10001</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>notebook-mvk</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>
<user>
<name>test</name>
<password>test</password>
<au>on</au>
<spider>no</spider>
</user>
<user>
<name>user2</name>
<password>pass2</password>
<au>on</au>
<spider>no</spider>
</user>
<user>
<name>user3</name>
<password>pass3</password>
<au>on</au>
<spider>no</spider>
</user>
<user>
<name>user4</name>
<password>pass4</password>
<au>on</au>
<spider>no</spider>
</user>
&#60;!-- Remove if you dont use reverse login
<user>
<name>User5</name>
<password>Pass5</password>
<hostname>localhost</hostname>
<port>12345</port>
<spider>yes</spider>
</user>
--&#62;

</newcamdserver>
</newCSconfig>



When I start newcs, i get the following log:


[ 21:51:23 ] [ Box detect ] Windows XP Build 2600
[ 21:51:23 ] [ Config ] Option <PPV> for device 0 (phoenix) not present
[ 21:51:23 ] [ Config ] COM6 ECM priority: round
[ 21:51:23 ] [ EMM Cache ] Initialising Cache with 100 entries

[ 21:51:23 ] [ ECM Cache ] Initialising Cache with 100 entries

[ 21:51:23 ] [ Loader ] Reader type 2 on node COM6

[ 21:51:23 ] [ Phoenix ] Opening device COM6
[ 21:51:23 ] [ Phoenix ] Setting baud to 9600
[ 21:51:23 ] [ Loader ] Reset failed ...
[ 21:51:24 ] [ Loader ] Reader type 2 on node COM6

[ 21:51:24 ] [ Phoenix ] Opening device COM6
[ 21:51:24 ] [ Phoenix ] Setting baud to 9600
[ 21:51:25 ] [ Loader ] Reset failed ...
[ 21:51:25 ] [ Loader ] Reader type 2 on node COM6

[ 21:51:25 ] [ Phoenix ] Opening device COM6
[ 21:51:25 ] [ Phoenix ] Setting baud to 9600
[ 21:51:26 ] [ Loader ] Reset failed ...
[ 21:51:26 ] [ Loader ] Reader type 2 on node COM6

[ 21:51:26 ] [ Phoenix ] Opening device COM6
[ 21:51:26 ] [ Phoenix ] Setting baud to 9600
[ 21:51:27 ] [ Loader ] Reset failed ...
[ 21:51:27 ] [ Loader ] Reader type 2 on node COM6

[ 21:51:27 ] [ Phoenix ] Opening device COM6
[ 21:51:27 ] [ Phoenix ] Setting baud to 9600
[ 21:51:28 ] [ Loader ] Reset failed ...
[ 21:51:28 ] [ Loader ] Reader type 2 on node COM6

[ 21:51:28 ] [ Phoenix ] Opening device COM6
[ 21:51:28 ] [ Phoenix ] Setting baud to 9600
[ 21:51:29 ] [ Loader ] Reset failed ...
[ 21:51:29 ] [ Loader ] Reader type 2 on node COM6

[ 21:51:29 ] [ Phoenix ] Opening device COM6
[ 21:51:30 ] [ Phoenix ] Setting baud to 9600
[ 21:51:30 ] [ Loader ] Reset failed ...
[ 21:51:31 ] [ Loader ] Reader type 2 on node COM6

[ 21:51:31 ] [ Phoenix ] Opening device COM6
[ 21:51:31 ] [ Phoenix ] Setting baud to 9600
[ 21:51:31 ] [ Loader ] Reset failed ...
[ 21:51:32 ] [ Loader ] Reader type 2 on node COM6

[ 21:51:32 ] [ Phoenix ] Opening device COM6
[ 21:51:32 ] [ Phoenix ] Setting baud to 9600
[ 21:51:33 ] [ Loader ] Reset failed ...
[ 21:51:33 ] [ Loader ] Reader type 2 on node COM6

[ 21:51:33 ] [ Phoenix ] Opening device COM6
[ 21:51:53 ] [ Phoenix ] Setting baud to 9600
[ 21:51:53 ] [ Loader ] Reset failed ...
[ 21:51:54 ] [ Loader ] Reader type 2 on node COM6

[ 21:51:54 ] [ Phoenix ] Opening device COM6
[ 21:51:54 ] [ Phoenix ] Setting baud to 9600


I tried different versions of newcs, without any succes.

The card I use is a Canal Digitaal NL card. I also tried a FireCrypt card (wich comes together with my DreamBox 7025), but have the same problem.


Can anyone help me to get this stuff working? After 4 days of 20 hours I'm getting a little tyred of it.


Any help welcome!!


Thanks,

Maantje

I have just downloaded newcs16 and installed it on my pc. I had a infinity usb phoenix lying around and went looking for it, hooked it up, set it to phoenix mode, added my card, set user and pass (amongst other settings) in newcs.xml and that was that on the computer side.

Clean install of gemini 4.0 on my 7020, installed mgcamd 1.25 on reciever tinkered a bit with necessary files and voila. :speak_cool:

What can I say, thank you seems little, I found you guide and instructions very clear. :thumbsup:

(note - no previous experience in card sharing).

Your are quick learning then, in my time setting it up took about 1 week to get the job done using Linux, but then there was no such thing as usermanuals and help from overseas and this side of the ocean

Thanks for letting us know that this topic was usefull.

FreeSat

No doubt, I have been in computers and electronics for many years and I know that we (the new guys in card sharing and stuff) are taking advantage of the experience gathered by all you guys that have been busy with the subject for a number of years. All the credit for every advancement and success eventually leads back to you guys (who ever you may be).

All I want to say is thank you for being so forthcoming with the information you have gathered with so much work.

hello all
i am trying to setup but i have a problem that i saw again in the forum but without answers....i give you the log file. any ideas ??? plz help me


SetConsoleWindowInfo
SetConsoleScreenBufferSize
Reading Config file D:&#092;share&#092;newcs.xml

level: normal
type: init
output: all
logger config: level 1 type 3 output 255
log file: logfile.txt
udp log: host 192.168.2.2 port 10001
tcp port: 3001
[ 16:45:58 ] [ Box detect ] Windows XP Build 2600

[ 16:45:58 ] [ Config ] Option <PPV> for device 0 (phoenix) not present
[ 16:45:58 ] [ Config ] COM1 ECM priority: round

[ 16:45:58 ] [ EMM Cache ] Initialising Cache with 100 entries


[ 16:45:58 ] [ ECM Cache ] Initialising Cache with 100 entries


[ 16:45:58 ] [ Loader ] Reader type 2 on node COM1


[ 16:45:58 ] [ Phoenix ] Opening device COM1
[ 16:45:58 ] [ Phoenix ] Setting baud to 16129
[ 16:45:58 ] [ Phoenix ] Failed changing baud to 16129, trying 16457 instead
[ 16:45:58 ] [ Phoenix ] Setting baud to 16457

[ 16:45:59 ] [ Loader ] Reset failed ...

Can you please attach the config file and tell us which cardreader you're using.
This is essential information to get your problem solved.
Also tell us which serial port you are using to connect the reader.

FreeSat

the newcamd.conf you mean??
the reader is no name in phoenix mode at 6 Mhz...the newcamd.conf is below.........




# /var/tuxbox/config/newcamd.conf
#
# newcamd mandatory settings
#
# What Demux API is used? (1 = very old, 2 = rel (<a href="http://nl.wikipedia.org/wiki/DreamBox" target="_blank">DreamBox</a>), 3 = head (VDR))
DEMUX_API = 2
# on PPC version: What Box is used? Valid options are DBOX2, DM7000 and DM5600
# on I386 version this parameter is ignored
BOX_TYPE = DM7000
# Which device for writing control words should be used?
# Valid options are CA, SDEV or GTX
# (SDEV and GTX = /proc/bus/gtx, CA = /dev/caX or /dev/dvb/card0/caX)
CONTROL_WORD_DEVICE = CA
# What CA0 API is used?
# 3 for recent DVB-S driver or recent <a href="http://nl.wikipedia.org/wiki/DreamBox" target="_blank">DreamBox</a> drivers (dream.o from 1.07.3)
# also for ca1 use on dbox2
# 2 for older <a href="http://nl.wikipedia.org/wiki/DreamBox" target="_blank">DreamBox</a> driver (ca.o or dream.o up to 1.07.2)
# no effect on PPC version if CONTROL_WORD_DEVICE = GTX or SDEV
CA_API = 3
# output control words to /proc/bus/gtx in 16 byte or 4096 byte packets
# no effect on I386 version or on PPC version, if BOX_TYPE = DreamBox
GTX_OUTPUT_MODE = 16
# This is important for channels which frequently change between free and
# encrypted broadcasts. The change will be reflected in the PMT. If you
# don't want your picture to stop when the channel goes from free access
# mode to encrypted mode, either your zapper (zapit/Enigma) or newcamd
# itself has to keep track of PMT changes. Recent Enigma versions do this,
# so you can set PMT_UPDATE_WATCH to no. Recent Zapit versions also have
# this option, but it is not compiled by default. So when using Zapit
# without PMT updates, you need to enable newcamd to monitor the PMT
# (PMT_UPDATE_WATCH = yes). Having both zapper and newcamd monitor
# the PMT at the same time, can lead to all kind of instabilities and
# should therefore by avoided, even if it seems to work at first.
PMT_UPDATE_WATCH = no
# Use emulator?
EMU = yes
# if both control word server and emulator keys are available for the
# channel, which method should be tried first?
PREFER_EMU = yes
# deactivates the dbox2 Betacrypt CAM
# this has to be set to yes on <a href="http://nl.wikipedia.org/wiki/DreamBox" target="_blank">DreamBox</a>
DISABLE_CAM = yes
# use dbox2 Betacrypt CAM for caids 06, 17 or both (00)?
CAM_CASYS = 17
# Autoupdate for Emu and Control Word Servers
# AU is always yes if there are Betacrypt UDS control word server
# connected to newcamd
AU = yes
#
# newcamd debug options
#
# dumps all ca systems used by a channel on the console
SHOW_ALL_CA_SYSTEMS = no
# On Screen Display, neutrino, enigma or none
OSD = enigma
# Recent Enigma versions come with a new option "Use http authentication"
# in the Expert Setup menu. If this option is enabled, the Enigma web server
# requires all clients to authorize themselves with username (root) and
# password (usually dbox2 or DreamBox). The following option tells newcamd
# about the authentication username and password to use for the web server
# in order to be able to display its on screen information.
OSD_WEB_LOGIN = root:DreamBox
# print debug messages about ECM handling
DEBUG_ECM = yes
# print debug messages about EMM handling
DEBUG_EMM = no
# print debug messages about Control Word Server (CWS)
DEBUG_CWS = yes
# print debug messages about dbox2 CAM (cam-alpha.bin)
DEBUG_CAM = yes
# print command message to/from dbox2 CAM as hex strings
DEBUG_CAM_HEX = no
# print all plain control words used
SHOW_CW = no
# hex dump of entire PAT
SHOW_PAT = no
# hex dump of entire PMT
SHOW_PMT = no
# hex dump of entire ECM
SHOW_ECM = no
# hex dump of entire CAT
SHOW_CAT = no
# hex dump of entire EMM (AU)
SHOW_EMM = no
# show network ECM messages being sent and received from/to the cardservers
SHOW_CWS_ECM = no
# show network EMM messages being sent and received from/to the cardservers
SHOW_CWS_EMM = no
# hex dump of EMMs with wrong signature
EMM_REPORT_WRONG_SIG = no
# delay between channel zap and appearance of the OSD
OSD_WAIT_TIME = 10
#
# newcamd optional settings
#
# Delay between reception of new control word and writing them into
# the CSA registers
# this is a default, can be changed for each individual key in keylist
DEFAULT_CW_DELAY = 500
# reload config on every channel zap
RELOAD_CONFIG_ON_ZAP = yes
# reload keylist on every channel zap
RELOAD_KEYLIST_ON_ZAP = no
# write osd ca info to file
CA_INFO_FILE = /tmp/ecm.info
#
# newcamd mandatory settings for control word servers (cws)
#
# Cardserver list
#
# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name>
#
# wan connections will be dropped and rebuild if newcamd is told so by camdcmd
# (see admin options)
#
# hostname = uds to use betad, port is the serial port in that case
#
# CWS = uds 1 dummy dummy
# CWS = 192.168.2.2 10001 user1 pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan myservername
# CWS = 127.0.0.1 10000 dummy3 dummy3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
# this example works with the example cardserv.cfg!!!
CWS = 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
#
# newcamd optional settings for using control word servers (cws)
#
# Timeout for cardserver login in 100ms
CWS_CONNECT_TIMEOUT = 20
# Port to listen for incoming cardserver connections (reverse login)
# and/or admin connections
CWS_INCOMING_PORT = 12000
# Port to get a list of all connected cardservers, just telnet to it
CWS_DEBUG_PORT = 12001
# send keep alive messages to servers to keep connections from dying by
# unreasonable router NAT timeouts, make sure all cardservers/spiders you
# conntect to are v5.22 or newer, otherwise you'll loose connection to them,
# if set to yes
CWS_KEEPALIVE = yes
#
# newcamd admin control options
# (incoming port is the same as CWS_INCOMING_PORT)
#
# <password> <14 byte des key>
#
ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00

No no no, i mean the config file for your NewCS.
This file contains all the nessesary information the get the job done.

Ans what kind of card are you trying to share?
Irdeto?

FreeSat