Colossus,
I don't know what (or where) is a mistake, but my cardserver still don't working . . .

FreeSat can you explain me how to setting camx?

Thanks in advance,
Michele

Add the following lines to your current CAMX config file:
SERVER: 192.168.0.1 666 0100 00006a rdgd
SERVER: 192.168.0.2 666 0100 000065 rdgd
SERVER: 192.168.0.3 666 1702 000000 rdgd

These examples are for:
Server 192.168.0.1 port 666 using a Canal Digital/TV Vlaanderen smartcard (CAID: 006a)
Server 192.168.0.2 port 666 using a Cyfra+ smartcard (CAID: 0065)
Server 192.168.0.3 port 666 using a Premiere smartcard (Premiere CAID: 1702 or 1722)

Goodluck,
FreeSat

Mike

Its strange that you still have problems with setup.

2 things to keep in mind allways with DreamBox.
a) when you make any change in config files you have to RESTAR EMU from blue button softcam setup red button.
B) Some time the cardreader dont read the card the first time. Eject and reinsert the card 1 or 2 times.
(Sory for this silly note: But the card goes on the slot with the chip down).



colossus

ps: You have PM

FreeSat,
my cards are Sky Italia and InXtc/XPlus, can you give me the correct setting for those?

Colossus,
its very strange that overall configuration isn't working, but this is the fact.

Naturally I restart the emu after config changes apply and the card is inserted with the chip face down!!!!!

regards,
Michele

p.s. Colossus in next days I will contact you, thank.

I don't know the exact line for Sky but for the Inxtc card it is:
SERVER: 192.168.0.1 678 4a00 000000 rdgd

192.168.0.1 is a sample server again
678 is the sample serverport.

Goodluck.

FreeSat

Hi!

Is possible to setup three dreamboxes where they all would be both servers and clients.
For example:
-DreamBox #1 has card #1,
-DreamBox #2 has card #2,
-DreamBox #3 has card #3.

Now DreamBox #3 should be client of #2 and #1, server to #1 and #2 etc.

Hi m8

YES its possible to do that.
If you setup your boxes both as server and client to one another.

In newcs.xml of the boxes you put username and password for every client box
In Newcamd.conf of the boxes you put one cw line for every server box

See the first post and the files on it.

colossus

Hi guys,
my cardserver finally work!!!

thank to all people that helped me and a special thank to colossus.

Hi mike

good to know that. What was the problem anyway?????


colossus