DreamBox-dvb-modules.bb: update dm800/dm8000/dm500hd/dm800se hardware drivers
all
---
- add support for two vtuners
- use linuxtv api dvr devices instead of proprietary pvr device(s) .. this is later needed for better ts streaming support
- small pcr fix
- fixed small demux bug to prevent packets from previous running service in recorded ts streams
dm800se/dm500hd:
- updated audio/video decoder, video output, demux and hdmi output code
dm8000:
- updated video decoder, video output, demux and hdmi output code
take care this driver update needs at least 2nd stage loader #81

DreamBox-secondstage.bb: update dm7025/dm800/dm8000/dm800se/dm500hd 2nd stage loader to #81
- some usb stack fixes / improvements
- changed mem layout for dm800se/dm8000/dm500hd hardware drivers >= 20110215
- some html fixes needed for modern web browsers (i.e. fixed ineffective "flash" button)
- fixed frequently dm500hd poweron problems
- fixed possible ethernet problems
update writenfi tool to fix secondstage on the fly updates on dm8000

hhhmmm waar te downloaden vogelaar?


grtz

razors

http://www.dreamboxupdate.com/

En dan bij experimental opendreambox 1.6

oke bedankt voor de link

kan je de second stage loader gewoon als ipkg instaleren?????


grtz

razors

Hele goede drivers moet ik zeggen..schon beel..valt gewoon op.

PLI en Newnigma hebben inmiddels al mooi werk verricht

Waarom wil je dat doen razors?
Als je de nieuwe image flashed dan is dat voldoende.
Maar als het fout gegaan is, tijdens de flash, en je krijgt die ERROR in je display dan pas heb je die losse second stage loader nodig.

klopt piet

daar was ik al achter naar de relaese van 3.1.5

je kon alleen de drivers instaleren in combinatie met secondstage loader 81 toen was 3.1.5 nog niet uit

oud nieuws dus


grtz

razors

DreamBox-dvb-modules.bb: update dm800/dm800se/dm500hd/dm8000 hardware drivers
02-03-2011

- reentrancy fixes in demux and video/audio clip mode (fixed frequently kernel oops)
- fixed not visible PEP options on DM8000
- revert to previous video output, hdmi and video decoder code (DM500HD/DM800SE/DM8000)
this should fix some problems introduced with 20110215 drivers
- added pcr/hdmi kernel debug output messages to debug hdmi problems (DM800)

ik heb deze nu met de Newnigma2 snapshot van vandaag ( 02-03 ) erin gezet ( ja je moet wat )

moet zeggen dat het sd beeld zelfs schitterend is


grtz

razors

DreamBox-dvb-modules.bb: update dm800/dm800se/dm500hd/dm8000 hardware drivers to 20110309

- worked on dm800 hdmi connection lost problem
- fixed load average calculation again (broken since 20110302 drivers)
- worked on h264 buffer underflow problems on some h264 services

Kunnen we toch weer hobbyen.

bedankt voor het melden


grtz

razors

DreamBox-dvb-modules.bb: update dm8000 hardware drivers

- fixed lef/right audio channel switching via HDMI (broken since 20110302 drivers)

grtz

razors

DreamBox-secondstage.bb: update dm7020hd and dm8000 secondstage 83 loader to support new flash mapping (256MB support)

update dm800 dm800se dm500hd dm8000 hardware drivers


- hotfix freeze after some channel changes
- throttled mpeg decoder debug output a bit
- fixed bcm4506 tuner crash (no hab ack messages in kernel debug)
- fixed bcm4506 manual LDPC FEC modes
- fixed readback of current pilot state for dvb-s2 frontends (needs a linuxtv api fix)
- readback corrected symbolrate and frequency for bcm4501 and bcm4506
- cxd1981 DVB-C optimizations

Zijn die drivers niet de oorzaak van de bugs van dit moment?
Lijkt me verstandig om daar nog even mee te wachten dan.

Als het goed is is het hier weer mee opgelost, vooral het vastlopen na zappen.

- hotfix freeze after some channel changes

Ben benieuwd dan.
Dat de pioniers onder ons het verlossende antwoord geven

Werkt weer als vanouds met deze update


grtz

razors

update DreamBox hardware drivers

dm800/dm8000/dm800se/dm500hd
----------------------------
finally fixed 20110501 freeze hotfix

dm7025
-------
- fixed bcm4506 tuner crash (no hab ack messages in kernel debug)
- fixed bcm4506 manual LDPC FEC modes
- fixed bcm4506 readback of current pilot state
- readback corrected symbolrate and frequency for bcm4506
- cxd1981 DVB-C optimizations

Update dm500hd,dm800se,dm8000,dm7025,dm800 hardware drivers 04-04-2011

- bcm4506: reintroduce minimum tune timeout of 1,5sek to fix tune failed problems caused by slow SEC switches
- update dm8000 driver date too

DreamBox-dvb-modules: update dm800, dm8000, dm800se, dm500hd hardware drivers.


- added 3D framebuffer support (for side by side and top and bottom 3D services)
(no auto detection yet)
- fixed audio sync problems on playback to live transition
- bcm4505/06
* experimentally added blindscan support (needs e2 changes)
* experimentally added "Turbo FEC" support (needs e2 changes)
* added constellation buffer read support
* fixed problems when more than one 4505/4506 tuner is used in the same box
* fixed standby problems
* added possibility to use SCPC optimized search ranges
- alps-bsbe1-c01a
* experimentally added blindscan support (needs e2 changes)
* added constellation buffer read support
* fixed locking problems (better performance)
- bcm4501:
* added possibility to use SCPC optimized search ranges
- cxd1981: fixed tuner problems after bootup from deepstandby in DVB-C mode
- added Nagra rev. 1.1 CI support to dm8000
- small alsa signed / unsigned fix


Download DM8000

Download DM800se

Download DM800

Download DM500HD

thnx NSR

alleen bij de eerste download staat DM800 ipv DM8000 ( kleinigheidje blijf je houden )


grtz

razors

Bedankt voor het scherpstellen razors, valt ook nie mee soms..zal het vakantiegevoel nog wel zijn..

Vooral vasthouden dat gevoel NSR


grtz

razors

DreamBox-secondstage: update dm800, dm800se, dm500hd, dm8000 2nd stage loaders



dm8000: compatibility for other 256MB flash chips (EOL of old type)
dm800, dm800se, dm500hd: added enhanced flash error correction (only used with new firmware images)

update DreamBox hardware drivers
- fixed possible locking problems (deadlock)
- fixed hybrid tuner (cxd1981) init problem,
add possibilty for faster mode change via
FE_SET_PROPERTY DTV_DELIVERY_SYSTEM ioctl
- bcm4505 small typo fixed
- better /proc/stb(vmpeg/X/dst_* handling via dst_apply



http://www.dreamboxupdate.com/


05 September 2011 - Improved flash error correction
Starting today, images for the models DM500HD, DM800 SE and DM800HD PVR include an improved flash error correction feature.
In order to benefit from the improvements, it is required that you either flash the new image with the latest version of DreamUP (V1.3.3.8) or flash a new second stage loader ( DM500HD DM800HD PVR DM800 SE ) before flashing the image via your browser or other means.
If you use the online update functionality, the new second stage loader will automatically be installed after rebooting.
It is recommended that you flash the new image for improved stability.